PAN Pesticides Database - California Pesticide Use

Pesticide Use on Kumquat in 2016

Note: See Working with the Information on this Page section below for important notes about this data.

Identifying information about Kumquat, including commodity group and code number.
Top 50 pesticides used on Kumquat, with information on the identity, use type and toxicity of each pesticide, as well as gross pounds used, application rate, acres planted, and number of applications.
Pesticide use on Kumquat by county for all counties in California, with information on gross pounds used, application rate, acres planted, and number of applications.

Crop or Site information for Kumquat

Basic Identification Information About This Crop or Site
Name
CDFA Commodity Group
Use Category
EPA Site Code
DPR Site Code
Kumquat
Fruits and Nuts
AG
02003
2003

Accuracy of acres planted data not evaluated for this crop.

 

Top 50 Pesticides Used on Kumquat in California in 2016


Totals for 2003 and later may be under-reported due to omission of adjuvants in DPR's data since that time.
Chemical Name
(CA Chem Code)
Chemical Class PAN Bad Actor Gross
Pounds
Application Rate
Pounds per acre treated
Acres Planted
where all or part
has been sprayed
Acres Treated
All Chemicals (NA, 00)
Not Listed 199.7 0.26 48.3 773.8
Uses:
Glyphosate, potassium salt (5820)
Phosphonoglycine Yes 33.5 0.33 38.0 102.0
Uses: Herbicide
Mineral oil, unrefined (765, 763, 473)
Petroleum derivative-Aromatic Yes 33.4 16.7 1.00 2.00
Note! Data for Mineral oil, unrefined summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Insecticide, Adjuvant, Herbicide, Fungicide
Glyphosate, isopropylamine salt (1855)
Phosphonoglycine Yes 28.0 0.82 23.0 34.0
Uses: Herbicide
Mineral oil, refined (401, 3846, 3847, 2601, 2106, 2045, 2768)
Petroleum derivative-Saturated Not Listed 27.8 6.95 4.00 4.00
Note! Data for Mineral oil, refined summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Herbicide, Plant Growth Regulator, Insecticide, Adjuvant, Solvent
Glyphosate, monoammonium salt (2301, 2319)
Phosphonoglycine Yes 14.9 0.18 23.0 85.0
Note! Data for Glyphosate, monoammonium salt summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Herbicide
Imidacloprid (3849)
Neonicotinoid Not Listed 8.74 0.49 18.2 17.8
Uses: Insecticide
Alcohol ethoxylate (C9-C11, 6 EO) (2700)
Polyalkyloxy Compound Not Listed 8.08 0.06 23.0 137.0
Uses: Adjuvant
Methyl soyate (3519)
Fatty acid ester Not Listed 8.04 0.21 23.0 39.0
Uses: Adjuvant
Polyoxyethylene soybean oil fatty acid ester (mol. Wt. 850) (3338)
Polyalkyloxy Compound Not Listed 6.15 1.54 2.00 4.00
Uses: Insecticide, Adjuvant
Fenpropathrin (2234)
Pyrethroid Yes 6.04 0.32 19.2 19.1
Uses: Insecticide
Metaldehyde (379)
Aldehyde Not Listed 5.00 0.42 12.0 12.0
Uses: Molluscicide
Copper oxide (ous) (175)
Inorganic-Copper Not Listed 4.20 4.20 1.00 1.00
Uses: Fungicide, Insecticide
Copper hydroxide (151)
Inorganic-Copper Not Listed 3.19 0.64 5.00 5.00
Uses: Fungicide, Microbiocide, Nematicide
Emulsifiable methylated vegetable oil (5224)
Not Listed 3.15 0.17 18.0 18.0
Uses: Insecticide, Adjuvant
Chlorpyrifos (253)
Organophosphorus Yes 1.88 0.94 2.00 2.00
Uses: Insecticide, Nematicide
Polyoxyethylene castor oil (3740, 2555, 5974)
Polyalkyloxy Compound Not Listed 1.24 0.03 25.0 43.0
Note! Data for Polyoxyethylene castor oil summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Adjuvant, Soap or Surfactant
Tall oil (2912)
Botanical Not Listed 0.82 0.20 2.00 4.00
Uses: Adjuvant
Saflufenacil (5977)
Amide Not Listed 0.74 0.0073 23.0 102.0
Uses: Herbicide
Nonyl phenoxy poly (ethylene oxy) ethanol (1743, 1397, 3999, 5755)
Polyalkyloxy Compound Not Listed 0.73 0.02 23.0 39.0
Note! Data for Nonyl phenoxy poly (ethylene oxy) ethanol summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Adjuvant, Plant Growth Regulator, Soap or Surfactant
Modified phthalic glycerol alkyd resin (1159)
Polymer Not Listed 0.57 0.57 1.00 1.00
Uses: Adjuvant
Zinc phosphide (626)
Inorganic-Zinc Yes 0.54 0.05 12.0 12.0
Uses: Rodenticide
Spinosad (mixture of Factors A and D) (3983)
Spinosyn, Macrocyclic Lactone Not Listed 0.42 0.14 3.00 3.00
Uses: Insecticide
Pyrethrins (510)
Botanical Yes 0.35 0.04 3.00 9.00
Uses: Insecticide
Spinetoram (XDE-175-J) (5946)
Spinosyn Not Listed 0.33 0.07 5.00 5.00
Uses: Insecticide
Undecyl polyoxyethylene (5 moles ethylene oxide) (3929)
Polyalkyloxy Compound Not Listed 0.33 0.02 18.0 18.0
Uses: Adjuvant
Thiamethoxam (5598)
Neonicotinoid Not Listed 0.29 0.06 5.00 5.00
Uses: Insecticide
Cypermethrin, zeta (3866)
Pyrethroid Yes 0.25 0.05 5.00 5.00
Uses: Insecticide
Phosphoric acid (871)
Inorganic Not Listed 0.19 0.01 18.0 18.0
Uses: Fungicide, pH Adjustment, Herbicide, Microbiocide
Polyether modified polysiloxane (5223)
Silicone Not Listed 0.17 0.0095 18.0 18.0
Uses: Adjuvant
Spirotetramat (5955)
Keto-enol Not Listed 0.16 0.16 1.00 1.00
Uses: Insecticide
Flupyradifurone (6098)
Neonicotinoid Not Listed 0.13 0.13 1.00 1.00
Uses: Insecticide
Abamectin (2254, 5916, 5917)
Macrocyclic Lactone, Botanical Yes 0.13 0.03 5.00 5.00
Note! Data for Abamectin summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Insecticide
Pyriproxyfen (4019)
Juvenile hormone mimic Not Listed 0.11 0.11 1.00 1.00
Uses: Insect Growth Regulator
Cyfluthrin (2223, 3956)
Pyrethroid Not Listed 0.10 0.10 1.00 1.00
Note! Data for Cyfluthrin summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Insecticide
Indaziflam (5999)
Triazine Not Listed 0.05 0.05 1.00 1.00
Uses: Herbicide
Neem oil (3979, 6065)
Botanical Not Listed 0.04 1.46 0.0100 0.03
Note! Data for Neem oil summarizes data from 2 or more chem codes and may not agree with DPR summaries which total data for each chem code.
Uses: Insecticide

Regional Use for All Chemicals on Kumquat in 2016

Region
(County Code)
Gross
Pounds
Application
Rate
pounds per acre treated
Acres Planted
where all or part
has been sprayed
Acres Treated Application
Count
California (00)
199.7 0.26 48.3 773.8 70
Riverside (33)
82.9 0.13 21.2 647.2 30
San Diego (37)
67.6 0.92 20.0 73.6 18
Tulare (54)
40.8 3.14 2.00 13.0 13
Imperial (13)
8.47 0.21 5.00 40.0 6
Santa Barbara (42)
0.04 1.46 0.0100 0.03 3
Working with the Information on this Page

* Complete 2001 data for Kern county was never submitted by the Kern County Agricultural Commissioners office. This missing data includes approximately 32,000 records totaling roughly 10 million pounds. An omission of this scale will significantly impact statewide trends.

** The 2005 data for Ventura county is incomplete because not all of the data was available at the time of DPR's release. Missing data includes mostly applications made in November and December. An estimate based on reported use in Ventura County during November and December from 2002 to 2004 suggests that the 2005 total pounds is underreported by approximately 500,000 pounds. The active ingredients most affected are captan and petroleum oil. See the DPR's 2005 PUR report for additional details.

NOTE! See methodology and documentation for California Pesticide Use Reporting for important qualifications on these numbers.

Click on the commodities name links for special caveats on the data for each commodity. For more detailed use information, including data for other years, search our California Pesticide Use database. Original source for all pesticide use data is the California Pesticide Use Report (PUR) dataset, collected and managed by the California Department of Pesticide Regulation. Significant processing of the original dataset is required to generate the summary data presented here; see documentation for a full discussion of data handling.

NOTE! Comments on the accuracy of Acres Planted reflect PAN's analysis of acreage data from the California Agricultural Statistics Service (CASS) and Department of Pesticide Regulation Pesticide Use Reporting data. The method used to assess acreage accuracy is described in the documentation. Accuracy was evaluated for aggregate, statewide California acreage, but not for smaller regions (e.g., counties). See CASS acreage estimates for additional information.

Click on underlined terms for definitions or go to the Pesticide Tutorial overview page.

Any underlined term with a book icon has additional information.

To print this page, choose Print. To export this data, choose Save As 'HTML Source' and open it in Excel or equivalent program.

Definitions
  • Acres Planted is the planted acreage of the crop in the selected region where the selected chemical was applied. This figure may not be the total acreage of the selected crop. To obtain the total planted acreage for a crop or county, see the crop and county pages available from the Pesticide Use Search Page. See documentation for important distinctions between acres treated and acres planted.
  • Acres Treated is the acreage of the crop actually treated with the pesticide. Gross Pounds applied divided by Acres Treated is the application rate of the pesticide. The difference between Acres Planted and Acres Treated is best explained through an example:If a farmer has a 100-acre field and sprays 50 acres, then the Acres Planted will be 100 and the Acres Treated will be 50. If a farmer sprays 50 of their 100 acres three times, then the Acres Planted will remain at 100 acres, but now the value of Acres Treated will be 150. This figure may not be the total acreage of the selected crop. See documentation for further distinctions between acres treated and acres planted.
  • Application Count indicates the number of times this chemical was applied.
  • Application Rate indicates the total pounds applied to acreage divided by the total treated acres. Only pounds applied to acreage are used to calculate the application rate. This excludes pesticides used to fumigate stored commodities or other non-cropland applications. See documentation for important distinctions between acres treated and acres planted.
  • Chemical Class indicates the chemical classification of this chemical.
  • Chemical Code is the California Department of Pesticide Regulation code number assigned as an identifier for each chemical.
  • Chemical Uses indicates the major uses for this chemical, with the most common use listed first.
  • County Code is a code number that various California State agencies use to identify each California county. There are 58 total counties.
  • Field Count is the number of fields where this chemical was applied.
  • Gross Pounds indicates the total pounds used, including both pounds used on acreage and pounds used in other applications such as commodity fumigation.
  • PAN Bad Actor indicates whether this chemical belongs to the group of most toxic pesticides or not. See link for a full definition of this term.